Zu jeder Bestellung mit mindestens einem OWATROL-Produkt bekommt ihr ein Paar ONYX-Arbeitshandschuhe gratis dazu! Die rot-schwarzen Handschuhe sind praktische Helfer für eure nächsten Werkstatt-, Montage- und Renovierungsarbeiten. Die Aktion gilt für alle Gebindegrößen – ein Paar pro Bestellung.
Transyl - Release Agent & Lubricant
Original price
€14,90
-
Original price
€14,90
Original price
€14,90
€14,90
-
€14,90
Current price
€14,90
400.0ml | €37,25 / l
This multi-purpose penetrating lubricant and release oil is a versatile product for maintenance, care, and upkeep.
It reliably loosens mechanisms stuck or jammed due to rust and oxidation, restoring their mobility. Thanks to its excellent wetting properties, it penetrates deep into narrow gaps and quickly spreads across the surface.
The very good flowability and the included lubricating components ensure lasting lubrication of moving parts. At the same time, the product has a cleaning effect by effectively removing dirt, deposits, and grease. Finally, it leaves a thin, uniform protective film that protects treated surfaces from moisture and renewed oxidation.
Properties
- contains a high proportion of high-quality, non-oxidizing (non-drying) mineral oils
- guaranteed free of acids and aggressive ingredients
- enormous creep and spreading behavior due to highest capillary action combined with its own active support
- due to very low surface tension and very slow evaporation of the included solvents
- creeps upwards even in a stuck thread
- penetrates rust and metal connections effortlessly, goes EVERYWHERE
- dissolves rust and leaves a lubricious film
- easiest application
- loosens and dissolves old, dried lubricants and residues
- does not dry out, but forms a permanently protective film in the microporosity of the substrate
- prevents new oxidation, rust formation and functional impairment
- does not attack the substrate (metals, plastics, paints)
- can be used between -30°C and +50°C
Areas of application
- loosens stuck screws, hinges and other moving parts that are "welded" by rust
- enables non-destructive disassembly of seized components
- eliminates creaking and squeaking of hinges, locks, etc.
- makes periodic disassembly for lubrication superfluous
- loosens and displaces dried residues of other lubricants, even for extremely hard-to-reach places, which are often the critical areas for proper function
- reduces friction of moving parts such as rollers, pulleys, guides, bearings, etc.
-
replaces all common lubricants economically
Further product features
- Appearance: Transparent, slightly amber
- Sheen: Satin
- Coverage: 8-18m²/L per coat. Determine exact coverage on site.
- Dilution: Use undiluted only! Thickened OWATROL OIL cannot be redissolved or diluted.
- Binder: Mixture of various oils
- Application: Stir OWATROL OIL before use; apply by brush.
- Solvent: Aliphatic hydrocarbons
- Specific gravity at 18°C: Approx. 0.9 g/cm³VOC EU limit for this product (Cat.0 A/e): 000g/l (2010) This product contains 460g/l VOC
- Volume solids content: Approx. 55%
- Packaging: 125ml, 0.5L, 1L, 5L, 20L, 200L and as a 300ml spray can
- Storage: Shelf life approx. 3 years, in sealed original container. Store opened containers upside down. Do not transfer to plastic containers!
- Flash point: >67°C
- Application temperature: -10-+35°C on dew- and ice-free surfaces
- Drying time at 20°C: Touch dry 6-8 hours. Recoatable after 12-24 hours. For subsequent water-based paints, at least 7 days. Different temperatures and humidity can lead to a significant change in the drying process.
- Tools: Brush, roller, spray gun
- Cleaning of tools: Immediately after use with universal primer.
- Suitability: Corroded surfaces of iron, steel, cast iron, stainless steel and light metal. Should be overcoated or cyclically supplemented for permanent weathering. Not suitable for areas constantly exposed to water.
-
Safety instructions: See label and EN safety data sheet. Cloths soaked with air-drying oils can self-ignite, therefore always spread out to dry before disposal or collect in sealed metal containers
Processing
- Surface Pre-treatment: The surface should be free of grease and substances that reduce adhesion, such as waxes or polishing and cleaning agents. Non-adhering old coatings must be completely removed. Mechanically clean the surface. Do not remove firmly adhering rust, as this is a prerequisite for optimal function.
- Application: Apply OWATROL OIL generously, if necessary in several wet-on-wet coats, until the existing rust is saturated and "filled" to its full thickness. Film formation should be avoided. Remove any excess with an absorbent cloth 20-30 minutes after the last application. An optimally sealed surface will appear semi-gloss.
- Care and Maintenance: Areas that have been protected with OWATROL OIL only, without subsequent coatings, must be supplemented from time to time with another application of OWATROL OIL, depending on weathering. This is necessary as soon as the first rust spots emerge from the coating, i.e., when it no longer appears uniformly semi-gloss.
-
Disposal: Only dispose of emptied containers for recycling. Liquid material residues should be handed in at collection points for old paints/varnishes. Completely dried material can be disposed of as construction and demolition waste or as municipal or household waste. Never allow paint and varnish residues to enter the sewage system or water bodies. Dispose of dried brushes and rollers with household waste.
Further information
This product information replaces all older product information for the same product.
It serves to inform our customers about the properties of our product.
The present information is based on our many years of experience and is the result of extensive investigations. The content does not constitute a contractual legal relationship.
The advice given can only be a guide, as it depends heavily on the nature and condition of the substrate to be treated.
The user is not released from the responsibility of checking our products for their suitability for the intended application.
Suitability for the intended purpose must always be checked.
As technology is constantly evolving, it is the user's responsibility to ensure, before starting work, that this information has not been replaced by more recent information.
The information is for informational purposes only.
The manufacturer is not liable for the use of the products, as this does not take place under his supervision.
