Zu jeder Bestellung mit mindestens einem OWATROL- oder MENEKS-Produkt bekommt ihr ein Paar ONYX-Arbeitshandschuhe gratis dazu! Die rot-schwarzen Handschuhe sind praktische Helfer für eure nächsten Werkstatt-, Montage- und Renovierungsarbeiten. Die Aktion gilt für alle Gebindegrößen – ein Paar pro Bestellung.
MENEKS EXE 150 ml – Benzinstabilisator und Kraftstoffsystemreiniger für Oldtimer
Original price
€10,95
-
Original price
€10,95
Original price
€10,95
€10,95
-
€10,95
Current price
€10,95
150.0ml | €73,00 / l
Bereite deinen Benzin-Oldtimer auf die Winterpause vor: MENEKS EXE stabilisiert den Kraftstoff, beugt Verharzungen vor und bindet Wasser im Kraftstoffsystem. Standzeitschutz und Systemreinigung für selten bewegte Klassiker. Eine Dose mit 150 ml reicht für 25 Liter Benzin.
Produktbeschreibung
Die letzte Ausfahrt ist vorbei, dein Klassiker geht in die Winterpause. Während längerer Standzeiten kann Benzin altern und Rückstände bilden, die feine Düsen und Kraftstoffwege beeinträchtigen. MENEKS EXE hilft, diesen Verharzungen vorzubeugen und das Kraftstoffsystem auf die nächste Saison vorzubereiten.
Der Kraftstoffzusatz verbindet Benzinstabilisierung und Systemreinigung. Nach Herstellerangaben erhält EXE die Zündfähigkeit des Benzins, wirkt dessen Oxidation entgegen und verhindert die Bildung harzartiger Ablagerungen im Vergaser oder Einspritzsystem. Gleichzeitig löst und dispergiert es Rückstände und bindet Wasser im Tank und Kraftstoffsystem.
Ob Winterlager, längere Saisonpause oder nur gelegentliche Ausfahrten: EXE lässt sich zur Standzeitvorsorge benzinbetriebener Klassiker einsetzen. Auch klassische Motorräder und Roller mit Zwei- oder Viertaktmotor gehören zum Einsatzbereich, mit und ohne Katalysator.
Aus unserer WerkstattpraxisBei Strive For Car verwenden wir MENEKS EXE zur Standzeitvorsorge, um Verharzungen durch alternden Kraftstoff vorzubeugen.
Anwendung und Dosierung
Vor der längeren Fahrpause passend zur tatsächlichen Benzinmenge in den Tank geben. Den Motor anschließend so lange betreiben, bis sich der behandelte Kraftstoff im gesamten Kraftstoffsystem verteilt hat. 150 ml reichen für 25 Liter Benzin; das entspricht 6 ml je Liter. Etikett und fahrzeugspezifische Hinweise zur Stilllegung beachten.
- 10 Liter Benzin60 ml MENEKS EXE
- 25 Liter Benzin150 ml MENEKS EXE
- 40 Liter Benzin240 ml MENEKS EXE
- 50 Liter Benzin300 ml MENEKS EXE
Inhalt: 150 ml. Kraftstoffzusatz zur Zugabe in den Benzintank.
Further product features
- Appearance: Transparent, slightly amber
- Sheen: Satin
- Coverage: 8-18m²/L per coat. Determine exact coverage on site.
- Dilution: Use undiluted only! Thickened OWATROL OIL cannot be redissolved or diluted.
- Binder: Mixture of various oils
- Application: Stir OWATROL OIL before use; apply by brush.
- Solvent: Aliphatic hydrocarbons
- Specific gravity at 18°C: Approx. 0.9 g/cm³VOC EU limit for this product (Cat.0 A/e): 000g/l (2010) This product contains 460g/l VOC
- Volume solids content: Approx. 55%
- Packaging: 125ml, 0.5L, 1L, 5L, 20L, 200L and as a 300ml spray can
- Storage: Shelf life approx. 3 years, in sealed original container. Store opened containers upside down. Do not transfer to plastic containers!
- Flash point: >67°C
- Application temperature: -10-+35°C on dew- and ice-free surfaces
- Drying time at 20°C: Touch dry 6-8 hours. Recoatable after 12-24 hours. For subsequent water-based paints, at least 7 days. Different temperatures and humidity can lead to a significant change in the drying process.
- Tools: Brush, roller, spray gun
- Cleaning of tools: Immediately after use with universal primer.
- Suitability: Corroded surfaces of iron, steel, cast iron, stainless steel and light metal. Should be overcoated or cyclically supplemented for permanent weathering. Not suitable for areas constantly exposed to water.
-
Safety instructions: See label and EN safety data sheet. Cloths soaked with air-drying oils can self-ignite, therefore always spread out to dry before disposal or collect in sealed metal containers
Processing
- Surface Pre-treatment: The surface should be free of grease and substances that reduce adhesion, such as waxes or polishing and cleaning agents. Non-adhering old coatings must be completely removed. Mechanically clean the surface. Do not remove firmly adhering rust, as this is a prerequisite for optimal function.
- Application: Apply OWATROL OIL generously, if necessary in several wet-on-wet coats, until the existing rust is saturated and "filled" to its full thickness. Film formation should be avoided. Remove any excess with an absorbent cloth 20-30 minutes after the last application. An optimally sealed surface will appear semi-gloss.
- Care and Maintenance: Areas that have been protected with OWATROL OIL only, without subsequent coatings, must be supplemented from time to time with another application of OWATROL OIL, depending on weathering. This is necessary as soon as the first rust spots emerge from the coating, i.e., when it no longer appears uniformly semi-gloss.
-
Disposal: Only dispose of emptied containers for recycling. Liquid material residues should be handed in at collection points for old paints/varnishes. Completely dried material can be disposed of as construction and demolition waste or as municipal or household waste. Never allow paint and varnish residues to enter the sewage system or water bodies. Dispose of dried brushes and rollers with household waste.
Further information
This product information replaces all older product information for the same product.
It serves to inform our customers about the properties of our product.
The present information is based on our many years of experience and is the result of extensive investigations. The content does not constitute a contractual legal relationship.
The advice given can only be a guide, as it depends heavily on the nature and condition of the substrate to be treated.
The user is not released from the responsibility of checking our products for their suitability for the intended application.
Suitability for the intended purpose must always be checked.
As technology is constantly evolving, it is the user's responsibility to ensure, before starting work, that this information has not been replaced by more recent information.
The information is for informational purposes only.
The manufacturer is not liable for the use of the products, as this does not take place under his supervision.
